Search results
Results From The WOW.Com Content Network
Phone connector (audio) Phone plug mated in a phone socket. The plug's grooved tip is held firmly by the socket's spring tip contact. When not mated, this spring instead connects to the flat switch contact for detecting a plug. A phone connector is a family of cylindrically -shaped electrical connectors primarily for analog audio signals.
USB-C plug. USB-C (SuperSpeed USB 5Gbps) receptacle on an MSI laptop. USB-C, or USB Type-C, is a 24-pin connector (not a protocol) that supersedes previous USB connectors and can carry audio, video, and other data, e.g., to connect to monitors or external drives. It can also provide and receive power, to power, e.g., a laptop or a mobile phone.
Lightning is a proprietary computer bus and power connector, created and designed by Apple Inc. It was introduced on September 12, 2012, in conjunction with the iPhone 5, to replace its predecessor, the 30-pin dock connector. The Lightning connector is used to connect Apple mobile devices like iPhones, iPads, and iPods to host computers ...
Tyrell Hatton had every reason to explode after the fiery Englishman caught a bad break on the back nine at Pinehurst No. 2. Hatton proceeded to march to the green, stood over the hole as ...
In both countries in recent years, schemes were introduced for family allowances that were smaller for some groups of workers than for others. In Italy, workers needed to have resided in the ...
If this does actually turn out to be the end for Andy Murray at Wimbledon — and, given his history, there are those who don't believe, or maybe just don't want to believe, the 37-year-old from ...
Telephone jack and plug. A telephone jack and a telephone plug are electrical connectors for connecting a telephone set or other telecommunications apparatus to the telephone wiring inside a building, establishing a connection to a telephone network. The plug is inserted into its counterpart, the jack, which is commonly affixed to a wall or ...
To allow for voltage drops, the voltage at the host port, hub port, and device are specified to be at least 4.75 V, 4.4 V, and 4.35 V respectively by USB 2.0 for low-power devices, [a] but must be at least 4.75 V at all locations for high-power [b] devices (however, high-power devices are required to operate as a low-powered device so that they ...