Search results
Results From The WOW.Com Content Network
A solenoid valve is an electromechanically operated valve . Solenoid valves differ in the characteristics of the electric current they use, the strength of the magnetic field they generate, the mechanism they use to regulate the fluid, and the type and characteristics of fluid they control. The mechanism varies from linear action, plunger-type ...
A 12V VRLA battery, typically used in small uninterruptible power supplies and emergency lamps. A valve regulated lead-acid (VRLA) battery, commonly known as a sealed lead-acid (SLA) battery, is a type of lead-acid battery characterized by a limited amount of electrolyte ("starved" electrolyte) absorbed in a plate separator or formed into a gel; proportioning of the negative and positive ...
Eveready 761 "C" battery with 4.5-volt, 3-volt, 1.5-volt tap screw terminals. The "C" battery is used to provide bias to the control grid. Until the early 1930s this was common practice in valve (tube) radio sets but was largely superseded by grid leak resistors or voltage divider biasing. Because the tube grids draw no current, the "C" battery ...
A double check valve or double check assembly (DCA) is a backflow prevention device designed to protect water supplies from contamination. [1] It is different from the two-way check valves (sometimes erroneously referred to as double check valves) used in air brake systems on heavy trucks which select from the highest pressure source.
Valve replacement surgery is the replacement of one or more of the heart valves with either an artificial heart valve or a bioprosthesis (homograft from human tissue or xenograft e.g. from pig). It is an alternative to valve repair .
A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from ...
Structure and function. The basic structure of a shuttle valve is like a tube with three openings; one on each end, and one in the middle. A ball or other blocking valve element (the shuttle) moves freely within the tube. When pressure of a fluid is exerted through the opening at one end it pushes the shuttle towards the opposite end, closing it.
An automatic bleeding valve or air release valve (ARV) is a plumbing valve used to automatically release trapped air from a heating system . Air, or other gas, may collect within plumbing. For water delivery systems to taps and basins, particularly with good main supply pressure, this air is usually flushed through with the water flow and does ...