Search results
Results From The WOW.Com Content Network
A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone , it has a small, battery-powered radio transmitter in the microphone body, which transmits the audio signal from the ...
The Logitech Unifying Receiver is a small dedicated USB wireless receiver, based on the nRF24L-family of RF devices, [1] that allows up to six compatible Logitech human interface devices (such as mice, trackballs, touchpads, and keyboards; headphones are not compatible) to be linked to the same computer using 2.4 GHz band radio communication.
XLR connectors (mid-50s to today) Most commonly used on professional microphones, the common 3-pin XLR connector is a standard for transferring balanced audio among professional audio equipment. The 4-pin XLR is the standard connector for intercom headsets, such as systems made by Clear-Com and Telex. Two pins are used for the mono headphone ...
The microphone's diaphragm is placed between the two ports; sound arriving from an ambient sound field reaches both ports more or less equally. Sound that's much closer to the front port than to the rear will make more of a pressure gradient between the front and back of the diaphragm, causing it to move more.
A boundary microphone (or pressure zone microphone) is one or more small omnidirectional or cardioid condenser mic capsule (s) positioned near or flush with a boundary (surface) such as a floor, table, or wall. The capsule (s) are typically mounted in a flat plate or housing. The arrangement provides a directional half-space pickup pattern ...
Paulette Cohn. July 9, 2024 at 9:15 PM. There were a lot of surprises on Tuesday night’s America’s Got Talentauditions, including some horrible performances, but there were also a few stellar ...
A pistonphone is an acoustical calibrator (sound source) that uses a closed coupling volume to generate a precise sound pressure for the calibration of measurement microphones. The principle relies on a piston mechanically driven to move at a specified cyclic rate, pushing on a fixed volume of air to which the microphone under test is coupled.
MARÍA TERESA HERNÁNDEZ. June 24, 2024 at 8:35 AM. NEW YORK (AP) — It’s not just a book. Back in the 1450s, when the Bible became the first major work printed in Europe with moveable metal ...